Before a turf can be set up, soil is assessed and prepared first. Here are the various tools necessary for the groundwork process on how to lay turf. First are rake, wheelbarrow, long knife, some planks, a spade, a garden hose and sprinkler. Do not forget that a brand new turf will grow best when the soil is thoroughly maintained just before installing the turf. This is to support the soil to encourage deep, rapid rooting for the turf to build and live well. Most premium turfs for instance need these important things: nourishment, oxygen and water from the soil. These three should be in right levels to aid the turf grow much better as this will significantly affect the way the lawn will look and live eventually. Moreover, with the correct depth of soil plus the right structure, this will assist how grass roots can penetrate the soil deeply during the process. This also boosts drought immunity level which assists with prevention of being packed with weeds easily and thus gives its more radiant real color. With less weeds, it’s definitely more appealing as well.

Steps in setting up the soil and laying turf (for brand new installation): First off, there need to be a minimum of 100mm (4 in.) or preferably 6 inches of soil. Turf consultants suggest the deeper the better so the soil can be turned over easily free from other debris, stones, clods and perennial weds. Free flowing lawn seeding soil along with a good premium turf could work at its finest for groundwork and set up. Good turfs for lawns e.g. Sir Walter, Empire Zoysia and Oz Tuff give level surface when installed on good soil while it is easy to spread and offers enough moisture. Simultaneously, fertilizers are used to help make sure the lawn to be prepped even early on. Soil improvers may also be included if possible to add important nourishment to the soil that can help boost turf’s fluids maintenance and resistance.

Additionally, it’s the digging and rotovating of soil before the means of how to lay turf. This step is necessary when the soil has been loosened to let it be slightly compacted as well. What turf personnel do is that they walk over the whole area at the right angles and direction raking the surface. They rake until it is fine and level. This technique takes some time but once done, everything from there will be worthwhile. Otherwise, if the soil is left uneven, this will result into unappealing appearance of the lawn and less resistance of both soil and turf to several climatic conditions. Indeed, you may already have observed that the soil is getting prepared as much as possible before the turf is delivered and gets set up. Preferably, the soil should be watered for a couple of days to offer enough water for the roots of the turf and settle the surface when it gets raked again. Lawn establishment fertilizers are also used throughout the soil establishment to guarantee the new turf is fed correctly.

How To Lay Turf: The procedure on how to lay turf begins with having the turf laid out right away once it’s rolled up. This is because the turf leaves will dry out easily as it’s not receiving any sunlight yet. Turf personnel begins with laying the turves closely end to end along straight edge. You will have subsequent rows that stagger each join in brickwork. Planks must be placed on the newly laid turves as well so it could be walked along and can easily be worked from.

Next is to firm down the turves with either wood or the head of a rake to ensure good contact between the turf and soil. It’s not recommended to utilize a roller in this process especially on freshly laid turf. The turf will also need to be pushed into a joint without extending them but pulling them. Remaining cracks need to be filled with light soil and then tamped down. Turf should then be cut using hand saw or long knife creating spade around edges and feathers. Right away after laying similar to during preparation, ample watering is required. This is the most important step to take to let the turf grow green, strong and healthy.

By admin